Last Buy

The IXFi series monolithic flexure mounts are a new line of mounts that are specifically designed for OEM applications. They have a wide variety of optic mounting options, including bulkhead mounting as either a front adjusted or through the bulkhead...

The IXF2.0t is the newest addition to Siskiyou's popular IXF monolithic flexure mounts. This new variation incorporates the same features as our IXFa but has the tip/tilt adjustments moved to allow tip and tilt adjustment from above. This feature is...

We now offer a 2.00" version of our popular IXF monolithic flexure mounts, available in front-adjust standard and beamsplitter configurations. These mounts use our 100TPI rolled thread adjustment screws for low stiction fine adjustments and are swaged...

The IXF.S single-axis flexure is designed with the same features as our popular IXFi and IXFa series flexure mounts. We have split the two-axis design into a modular design that is useful where only one-axis for tilt is required. The base of the IXF...

The IXF.S single-axis flexure is designed with the same features as our popular IXFi and IXFa series flexure mounts. We have split the two-axis design into a modular design that is useful where only one-axis for tilt is required. The base of the IXF...

The IXFti series Top adjust monolithic flexure mounts are specifically designed for OEM applications. Top adjust versions have a novel actuating mechanism to eliminate rotational torque being applied to the axis under adjustment. Designed to be either...

The IXFtss series Top adjust monolithic flexure mounts are specifically designed for OEM applications. Top adjust versions have a novel actuating mechanism to eliminate rotational torque being applied to the axis under adjustment. Designed to be either...

The IXFa series monolithic flexure mounts are a new line of mounts that are specifically designed for OEM applications. They have a wide variety of optic mounting options, including bulkhead mounting as either a front adjusted or through the bulkhead...

The IXF1.0tbsi is derived from our popular IXFi monolithic flexure mounts. Clear aperture cut-outs have been added to maximize beam clearance for beamsplitter applications. These cutouts are set at 45° and are large enough to accommodate a maximum...

For the LDP-1 and LDP-1B, We offer a 11mm adapter to accommodate the most common diode sizes. Spec Sheet: Click here to download 3D Model: Click here to download

Combining the IS-CA camera mount, OFT-160t 160mm tube and OFT with our OH1.0-OB, you can build a simple single objective imaging system. The IS-CA has a C-mount thread on one side for mounting a camera with matching thread. On the other end is the...

This solid aluminum adapter is shipped with three stainless steel caps screws for secure mounting to the OFT, optic focus translator. An internal thread is machined into the ring adapter that allows mounting to our OFT-160t lens tubes, IS-175lt parfocal...

The IS-OBF objective flipper lets you build a very compact imaging/ research microscope with 2 objectives. It very useful in applications like cell probing, where the sideways motion of a turret would disturb the sample. Mounted on a DTR series optical...

The IS-CA adapts 1 7/16-20 threads from the CBH-1.0 or IS-175Lt lens tube to 1-32 (C-mount) threads for attachment of standard cameras/detectors. With the CBH module and the IS-CA series mounts, you can add a camera or detector to your existing...

The new design of the ORM1.0 has two edges machined away to improve access to the optic mount and improve grip on the knurled ring for rotation of polarizing optics. The ORM1.0 has an 8-32 (M4) tapped hole in the lower edge to allow mounting to a PR...