Motorized Controllers

Any motorized stage must have a way to control the motor, match open-loop controllers with open-loop drives, closed-loop controllers with closed-loop drives, and stages. Either way, you will be able to control the position of your payload remotely and have excellent precision and stability. DC servo motors do not require power to hold position, so they can be powered off to reduce background noise for sensitive recordings.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
  • MC2010 Series Controller

    MC2010 Series Controller

    The MC2010 Multi Axis Motion Controller is a computer interface controller to position linear and rotary stages via LabVIEW based software installed on a customer supplied PC/Laptop with a USB port. The MC2010 controller is compatible with Siskiyou's...
    $4,200.00 - $10,200.00
  • MC1000e-R1/4T MC1000e-R1/4T

    MC1000e-R1/4T

    1-4 Axis Micrometer Dial Control, with Target and Retract Feature The MC1000e-R1/4T 4-axis dial controller acts as a remote micrometer control with a user selected target feature for 800 and 7000 series actuators, manipulators, and stages. The...
    $2,212.00
  • SB-MC1100e SB-MC1100e
    Add to Cart The item has been added

    SB-MC1100e

    Switch box for MC1100e or MC1000e-R/TOur switching box allows control of one to four 4-axis micromanipulators by one controller (MC2010 excluded). The basis of the design is simple and requires only an extra controller junction box for each added...
    $175.00
    Add to Cart The item has been added
  • SB-MC1000e SB-MC1000e
    Add to Cart The item has been added

    SB-MC1000e

    Switch box for MC1000eOur switching box allows control of one to four 4-axis micromanipulators by one controller (MC2010 excluded). The basis of the design is simple and requires only an extra controller junction box for each added micromanipulator or...
    $175.00
    Add to Cart The item has been added
  • SB-MC1000e-J SB-MC1000e-J
    Add to Cart The item has been added

    SB-MC1000e-J

    Switch box for MC1000e-JOur switching box allows control of one to four 4-axis micromanipulators by one controller (MC2010 excluded). The basis of the design is simple and requires only an extra controller junction box for each added micromanipulator or...
    $175.00
    Add to Cart The item has been added
  • MC501 MC501

    MC501

    MC500 and MC501 open-loop DC controllers are specifically designed to drive series 500 and 500MM actuators. The 4-axis MC500 controller allows a user to operate as many as four series 500 actuators of any travel length. It has two preset speed settings:...
    $402.00
  • MC500 MC500

    MC500

    MC500 and MC501 open-loop DC controllers are specifically designed to drive series 500 and 500MM actuators. The 4-axis MC500 controller allows a user to operate as many as four series 500 actuators of any travel length. It has two preset speed settings:...
    $587.00
  • MC1000e-R/T MC1000e-R/T

    MC1000e-R/T

    The MC1000e-R/T 4-axis dial controller acts as a remote micrometer control with a user selected target feature for 800 and 7000 series actuators, manipulators, and stages. The MC1000e-R/T uses encoder feedback from our closed-loop devices to create an...
    $3,650.00
  • MC1000e-J MC1000e-J

    MC1000e-J

    The MC1000e-J joystick controller is designed for micron-scale positioning of our 800 and 7000 series actuators, manipulators, and stages. The joystick control is proportional from slow to high through the travel range of the joystick motion. A...
    $1,500.00
  • MC401 MC401

    MC401

    The MC401 and MC400 open loop DC controllers are designed to drive our 400 series actuators. These controllers allow the user to operate from one to four of our 400 series actuators of any travel length. These controllers use a wall mounted DC power...
    $377.00
  • MC1000e-1 MC1000e-1

    MC1000e-1

    The MC1000e and MC1100e are simple push-button controllers with submicron positioning capability, and compatible with our 800 and 7000 series actuators, manipulators, and stages. These controllers have two preset speed settings: rapid (1.7 mm/second)...
    $785.00
  • MC1000e MC1000e

    MC1000e

    The MC1000e and MC1100e are simple push-button controllers with submicron positioning capability, and compatible with our 800 and 7000 series actuators, manipulators, and stages. These controllers have two preset speed settings: rapid (1.7 mm/second)...
    $1,275.00
  • MC400 MC400

    MC400

    MC400 open loop DC controllers are designed to drive our 400 series actuators. These controllers allow the user to operate from one to four of our 400 series actuators of any travel length. These controllers use a wall mounted DC power supplies as...
    $612.00