RTC-A4
Adapters to use with the RTC-0.5 rod clamp.8-32/M4 clearanceChoose options to see performance specifications and downloads.
RD$1,365.16
LDP-1 Series Positioner
SKU:
LDP SERIES
Name:
RD$13,031.11
LDP-1 Series Positioner
RD$13,031.11
The LDP, back adjustable laser diode positioner uses the XY & tip/tilt mechanics from our popular BFT-5 fiber positioner to create a compact 4-axis laser diode mount. The X and Y axis have 0.12-inches (3mm) of travel and are adjusted via 80TPI fine pitch screws. Tip/tilt motion uses 80TPI screws and has a total of 8-degrees of motion. Comes with 8-32 (M4) tapped holes on two edges for convenient mounting to PR series post. The LDP-1B has 4-40 clearance holes and the tip/tilt adjustments on the back side, allowing for through the bulkhead adjustments.
Product Features
- 80 pitch adjustment screws
- 4 axes of adjustment
- Safety shutter
- Vacuum compatible versions available upon request
Performance Specifications
Travel
- X and Y axis: 0.12 inch (3.1 mm)
- Pitch and Yaw: 8°
Minimum controllable motion
- X and Y axis: 1 µm
- Pitch and Yaw: 4.8 arc sec.
*Minimum controllable motion*: BASED ON 1° OF ADJUSTMENT SCREW ROTATION
Choose options to see performance specifications and downloads.
Related Products
TC-4
Our TC series table clamps offer a secure method of mounting base plates to isolation tables for off-axis mounting applications. These simple but sturdy clamps can be used in a wide range of...
RD$1,116.95
PRH/MRH Series Rod Holder
Our MRH and PRH series rod holders are fitted with a spring-loaded lock and is double-bored with three-point rod contact for smooth and wobble-free positioning. Accessories such as universal,...
RD$930.79 - RD$1,489.27
PR Series Rod
Our PR series precision rods are designed to be used with our PRH precision rod holders and ARH adjustable rod holders. These support rods are cross drilled, except the PR-1.0, to accept a 3/16 hex...
RD$744.63 - RD$1,365.16
RTC Series Clamp
The RTC-Series is a unique rotation/translation clamp with separate lock screws for each axis. This low profile clamp is designed to hold PR or MPR series rods and locate them anywhere on the...
RD$1,861.59
TC-A Series Adapter
Adapter for use with TC-4 series table clamp.Choose options to see performance specifications and downloads.
RD$744.63