Adjustable Towers

The MX312P and MX512P are versatile platforms for mounting various hardware at any level on an isolation table or platform. A complete set of AS series spacers allows flexible vertical adjustment from 2.5 to 12.0 inches in 0.5-inch increments. Metric configurations adjust from 65 to 310 mm using a combination of spacers to facilitate platform height placement at the center of the depth of focus for research microscopes. To adjust the height of the platform, AS-1.5 and AS-2.0 series spacers are screwed together using 1/4-20 (or M6) set screws. The top and the base plates are attached to the four columns with 1/4-20 (or M6) cap screws through the counterbored holes. Smaller height adjustments are made by adding AS-.5 and AS-1.0 spacers to the top of the longer AS spacers, secured by the final attachment of the top plate with long 1/4-20 (or M6) screws that go through the top plate and short spacers.
The MX312P and MX512P base plate has a unique hold-down pivot that allows secure single-bolt mounting anywhere on the mounting surface. The MX312P top plate is drilled and tapped with 1/4-20 (or M6) holes on two sides. These attachment points allow the MX312P to accept our MX-APC-T and MX-APT-T top plates. These adapter plates allow the experimenter to remove and replace equipment accurately and easily by loosening two flathead screws. A new assembly configuration allows simpler and faster change-out of spacers.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.