Laboratory Mechanicals

From setting up a new lab to replacing individual components in your existing system, Siskiyou provides quality mechanical devices and systems to enable fine adjustment and rock-solid mounting for your sensitive experiments and tasks.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (139)
Adjustment Screws & Micrometers (11)
Construction Hardware (5)
Clamps & Tweezers (0)
Dovetail Rail Systems (0)
Lab Jacks (3)
Motion Control (0)
Support Rod Systems (0)
  • 500MM Series Linear Drive 500MM Series Linear Drive
    Choose Options

    500MM Series Linear Drive

    The 500MM series of open loop actuators are designed specifically for driving mirror mounts that use 3/8" brass bushings to mount their drive screws. Their compact design minimizes interference to other devices in the area. The simple design uses a...
    $520.00
    Choose Options
  • 500 Series Linear Drive 500 Series Linear Drive
    Choose Options

    500 Series Linear Drive

    The 500 series open-loop actuators are designed to be used with our 50.5cr, 100.5cr or 150.5cr low profile crossed roller linear stages. They use 80TPI threads for high-resolution positioning and have built-in travel limit switches to ensure they won't...
    $520.00 - $620.00
    Choose Options
  • 420 Series Linear Drive 420 Series Linear Drive
    Choose Options

    420 Series Linear Drive

    The 420 series open loop DC drives are designed as motorized replacements for our TPI adjustment screws and manual micrometers used on our 330 series, 100cr series, and 200cr series stages. 420 series drives are a cost-effective alternative to our 840...
    $510.00 - $630.00
    Choose Options
  • AS-C Series Clamp AS-C Series Clamp
    Choose Options

    AS-C Series Clamp

    The AS-C post clamp is designed to mount to our AS series and LMP series posts. The symmetrical design has a 1/4-20(M6) clearance, 8-32(M4) and 1/4-20(M6) tapped holes conveniently located to attach a wide variety of devices. The clamp design will...
    $80.00
    Choose Options
  • UC Series Clamp UC Series Clamp
    Choose Options

    UC Series Clamp

    The UC-0.5 rod clamps mount two PR series precision rods at either 90 or at any angle. The Delrin® clamp screw or 3/16 integral hex screw permit fast, secure rod clamping. These precision bored clamps fit our PR series rods so well that with only...
    $33.00 - $35.00
    Choose Options
  • SW-2 Series Assortment SW-2 Series Assortment
    Choose Options

    SW-2 Series Assortment

    The SW-2 assortment is the SW-1 box but without the drivers.The screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series...
    $155.00
    Choose Options
  • PH-1 Series Hardware Assortment PH-1 Series Hardware Assortment
    Choose Options

    PH-1 Series Hardware Assortment

    Our PH-1 platform hardware has the necessary stainless steel cap screws, washers and set screws needed to assemble our PSR platform support rods and AS series spacers to our 4080, 8090, 1200, and 12000 series platforms.Product FeaturesStainless steel...
    $28.00
    Choose Options
  • MX-APC Series Base Plate MX-APC Series Base Plate
    Choose Options

    MX-APC Series Base Plate

    The MX-AP series adapter plates are specifically designed to speed up the cumbersome mounting and unmounting of translation stages stacked in an XY configuration. With the MX-AP series, it is no longer necessary to disassemble stacked stages to access...
    $155.00
    Choose Options
  • SW-1R Series Hardware Assortment SW-1R Series Hardware Assortment
    Choose Options

    SW-1R Series Hardware Assortment

    The SW-1R replacement screw/washer sets are available without the box or Bondhus drivers. The SW-2 assortment includes a box but without the drivers.Choose options to see performance specifications and downloads.
    $210.00
    Choose Options
  • SW-1 Series Hardware Assortment SW-1 Series Hardware Assortment
    Choose Options

    SW-1 Series Hardware Assortment

    The SW-1 screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series spacers to PSR series platform support rods. Also...
    $265.00
    Choose Options
  • MXT Series Platform MXT Series Platform
    Choose Options

    MXT Series Platform

    The MXT is a small and stable tilt platform that works well where the angle of attack needs to be adjusted. The angle is adjusted by turning the knob in the back of the stage. The angle of the platform surface can be read on the scale that is mounted on...
    $690.00
    Choose Options
  • MX5T Series Platform MX5T Series Platform
    Choose Options

    MX5T Series Platform

    The MX5T's adjustable wedge design facilitates fixed angle setups. The 5.0-inch x 5.0-inch platform's top plate is fixed in place by two adjustable linking arms. They are secured by four 1/4-20 hex screws to ensure rock solid stability. The angle is...
    $365.00 - $500.00
    Choose Options
  • MX-AB2 Series Adapter MX-AB2 Series Adapter
    Choose Options

    MX-AB2 Series Adapter

    Although the MX-AB2 was designed to be used with the 200cr and 200cri stages, the 1.0-inch spaced mounting holes allow the user to create stand-alone Z-axis mounting or add a Z-axis to X / XY from any of our motorized or manual stages.Product...
    $85.00
    Choose Options
  • MX-AB Series Adapter MX-AB Series Adapter
    Choose Options

    MX-AB Series Adapter

    The MX-AB right angle block is designed for mounting Z-axis stages to solid mounting surfaces or other stages. The MX-AB's simple design allows the user to configure many devices with 1/4-20(M6) tapped holes into a vertical application. This angle...
    $60.00
    Choose Options
  • 1280P Series Platform 1280P Series Platform
    Choose Options

    1280P Series Platform

    Our 1200 and 12000 series platforms are designed for maximum flexibility and machinability. With nine sizes to choose from, these solid aluminum platforms are an affordable option for added mounting surface. These platforms may be used as stand-alone...
    $320.00
    Choose Options
  • 8090P Series Platform 8090P Series Platform
    Choose Options

    8090P Series Platform

    The 8090 series platforms are designed to be the sample platform under a microscope or as an apertured platform for passing a laser beam through. They come in two models: blank and with aperture. The 8090Pb has a solid surface with 1/4-20(M6) mounting...
    $320.00
    Choose Options