Laboratory Mechanicals

From setting up a new lab to replacing individual components in your existing system, Siskiyou provides quality mechanical devices and systems to enable fine adjustment and rock-solid mounting for your sensitive experiments and tasks.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (139)
Adjustment Screws & Micrometers (11)
Construction Hardware (5)
Clamps & Tweezers (0)
Dovetail Rail Systems (0)
Lab Jacks (3)
Motion Control (0)
Support Rod Systems (0)
  • 8090P Series Platform 8090P Series Platform
    Choose Options

    8090P Series Platform

    The 8090 series platforms are designed to be the sample platform under a microscope or as an apertured platform for passing a laser beam through. They come in two models: blank and with aperture. The 8090Pb has a solid surface with 1/4-20(M6) mounting...
    $352.00
    Choose Options
  • 8090c Series Platform 8090c Series Platform
    Choose Options

    8090c Series Platform

    The 8090c perfusion chamber platform is specifically designed with the electrophysiologist in mind. With adequate mounting holes and a drainage trough around the perimeter for solution overflows. The 8090c is ideal for fixed-stage electrophysiology...
    $363.00
    Choose Options
  • MGB-3.0lp MGB-3.0lp
    Choose Options

    MGB-3.0lp

    The MGB-3.0lp magnetic base is designed to be used as a stable mounting platform for isolation tables lacking mounting holes, or on any magnetic surface. The magnetic field of the MGB-3.0lp is activated through a 60° rotation of a manual lever that...
    $292.00
    Choose Options
  • TC-4 TC-4
    Choose Options

    TC-4

    Our TC series table clamps offer a secure method of mounting base plates to isolation tables for off-axis mounting applications. These simple but sturdy clamps can be used in a wide range of applications, such as cable management or base plate mounting...
    $20.00
    Choose Options
  • MGB/HC MGB/HC
    Choose Options

    MGB/HC

    These small (1.0-inch diameter) magnetic bases are designed to be used with our MS series magnetic strips. The bases come in four tapped versions. The MGB/8 can be combined with our MPR post to create mounting solutions for many different applications...
    $42.00
    Choose Options
  • MGB/20 MGB/20
    Choose Options

    MGB/20

    These small (1.0-inch diameter) magnetic bases are designed to be used with our MS series magnetic strips. The bases come in four tapped versions. The MGB/8 can be combined with our MPR post to create mounting solutions for many different applications...
    $42.00
    Choose Options
  • MGF MGF
    Choose Options

    MGF

    The MGF magnetic feet are designed to be used as a stable attachment point for AS series spacers and PSR series platform support rods. This simple design is ideal for securely holding equipment to isolation tables lacking mounting holes. The rare earth...
    $29.00
    Choose Options
  • RTC-AA RTC-AA
    Choose Options

    RTC-AA

    Adapter assortment contains 1 each of the following adapters:RTC-A1 (1/4-20/M6 tapped)RTC-A2 (8-32/M4 tapped)RTC-A3 (1/4-20/M6 clearance)RTC-A4 (8-32/M4 clearance)Choose options to see performance specifications and downloads.
    $29.00
    Choose Options
  • RTC-A3 RTC-A3
    Choose Options

    RTC-A3

    Adapters to use with the RTC-0.5 rod clamp.1/4-20/M6 clearanceChoose options to see performance specifications and downloads.
    $25.00
    Choose Options
  • RTC-A2 RTC-A2
    Choose Options

    RTC-A2

    Threaded adapters to use with the RTC-0.5 series rod clamps.8-32/M4 threadedChoose options to see performance specifications and downloads.
    $22.00
    Choose Options
  • RTC-A1 RTC-A1
    Choose Options

    RTC-A1

    Threaded adapters to use with the RTC-0.5 series rod clamps.1/4-20/M6 threadedChoose options to see performance specifications and downloads.
    $22.00
    Choose Options
  • AB-U AB-U
    Choose Options

    AB-U

    The AB-U is a unique two-piece angle bracket that can be assembled into many different configurations. The two-piece design enables the construction of 90° plates and T-plates, two varieties of each, or two sets can be combined to create a box...
    $121.00
    Choose Options
  • MGB-3.0 MGB-3.0
    Choose Options

    MGB-3.0

    The MGB-3.0 magnetic base is designed to be used as a stable mounting platform for isolation tables lacking mounting holes, or on any magnetic surface. The 3.0-inch x 3.0-inch footprint has greater surface area and is more stable than similar magnetic...
    $182.00
    Choose Options
  • ABP-R ABP-R
    Choose Options

    ABP-R

    The ABP-R mounting base allows the user to coarsely adjust the position of a device both transversely and rotationally. The mounting slots on the ABP-R allow positioning between mounting holes on isolation tables and platforms while the center clamp...
    $50.00
    Choose Options
  • UMP-2.2 UMP-2.2
    Choose Options

    UMP-2.2

    The UMP-2.2 universal mounting plate is designed to provide mounting holes anywhere and in any orientation on microscope stages, isolation tables, or other components with 1/4-20 or M6 mounting holes. The low profile and compact design of the UMP-2.2...
    $50.00
    Choose Options
  • ABP-T2 ABP-T2
    Choose Options

    ABP-T2

    The ABP-T series translation base plates are designed to mount PRH series precision rod holders and AS series spacers. These simple designs enable the user to place these or other devices in many locations on the mounting surface. The ABP-T series...
    $20.00
    Choose Options