Laboratory Mechanicals

From setting up a new lab to replacing individual components in your existing system, Siskiyou provides quality mechanical devices and systems to enable fine adjustment and rock-solid mounting for your sensitive experiments and tasks.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (150)
Adjustment Screws & Micrometers (11)
Construction Hardware (5)
Clamps & Tweezers (0)
Dovetail Rail Systems (0)
Lab Jacks (3)
Motion Control (0)
Support Rod Systems (0)
  • SW-2 Series Assortment SW-2 Series Assortment
    Choose Options

    SW-2 Series Assortment

    The SW-2 assortment is the SW-1 box but without the drivers.The screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series...
    K553,777.35
    Choose Options
  • PH-1 Series Hardware Assortment PH-1 Series Hardware Assortment
    Choose Options

    PH-1 Series Hardware Assortment

    Our PH-1 platform hardware has the necessary stainless steel cap screws, washers and set screws needed to assemble our PSR platform support rods and AS series spacers to our 4080, 8090, 1200, and 12000 series platforms.Product FeaturesStainless steel...
    K100,037.20
    Choose Options
  • MX-APC Series Base Plate MX-APC Series Base Plate
    Choose Options

    MX-APC Series Base Plate

    The MX-AP series adapter plates are specifically designed to speed up the cumbersome mounting and unmounting of translation stages stacked in an XY configuration. With the MX-AP series, it is no longer necessary to disassemble stacked stages to access...
    K553,777.35
    Choose Options
  • SW-1R Series Hardware Assortment SW-1R Series Hardware Assortment
    Choose Options

    SW-1R Series Hardware Assortment

    The SW-1R replacement screw/washer sets are available without the box or Bondhus drivers. The SW-2 assortment includes a box but without the drivers.Choose options to see performance specifications and downloads.
    K750,278.99
    Choose Options
  • SW-1 Series Hardware Assortment SW-1 Series Hardware Assortment
    Choose Options

    SW-1 Series Hardware Assortment

    The SW-1 screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series spacers to PSR series platform support rods. Also...
    K946,780.63
    Choose Options
  • MXT Series Platform MXT Series Platform
    Choose Options

    MXT Series Platform

    The MXT is a small and stable tilt platform that works well where the angle of attack needs to be adjusted. The angle is adjusted by turning the knob in the back of the stage. The angle of the platform surface can be read on the scale that is mounted on...
    K2,465,202.40
    Choose Options
  • MX5T Series Platform MX5T Series Platform
    Choose Options

    MX5T Series Platform

    The MX5T's adjustable wedge design facilitates fixed angle setups. The 5.0-inch x 5.0-inch platform's top plate is fixed in place by two adjustable linking arms. They are secured by four 1/4-20 hex screws to ensure rock solid stability. The angle is...
    K1,304,056.34 - K1,786,378.55
    Choose Options
  • MX-AB2 Series Adapter MX-AB2 Series Adapter
    Choose Options

    MX-AB2 Series Adapter

    Although the MX-AB2 was designed to be used with the 200cr and 200cri stages, the 1.0-inch spaced mounting holes allow the user to create stand-alone Z-axis mounting or add a Z-axis to X / XY from any of our motorized or manual stages.Product...
    K303,684.35
    Choose Options
  • MX-AB Series Adapter MX-AB Series Adapter
    Choose Options

    MX-AB Series Adapter

    The MX-AB right angle block is designed for mounting Z-axis stages to solid mounting surfaces or other stages. The MX-AB's simple design allows the user to configure many devices with 1/4-20(M6) tapped holes into a vertical application. This angle...
    K214,365.43
    Choose Options
  • 1280P Series Platform 1280P Series Platform
    Choose Options

    1280P Series Platform

    Our 1200 and 12000 series platforms are designed for maximum flexibility and machinability. With nine sizes to choose from, these solid aluminum platforms are an affordable option for added mounting surface. These platforms may be used as stand-alone...
    K1,143,282.27
    Choose Options
  • 8090P Series Platform 8090P Series Platform
    Choose Options

    8090P Series Platform

    The 8090 series platforms are designed to be the sample platform under a microscope or as an apertured platform for passing a laser beam through. They come in two models: blank and with aperture. The 8090Pb has a solid surface with 1/4-20(M6) mounting...
    K1,143,282.27
    Choose Options
  • 8090c Series Platform 8090c Series Platform
    Choose Options

    8090c Series Platform

    The 8090c perfusion chamber platform is specifically designed with the electrophysiologist in mind. With adequate mounting holes and a drainage trough around the perimeter for solution overflows. The 8090c is ideal for fixed-stage electrophysiology...
    K1,179,009.84
    Choose Options
  • MGB-3.0lp MGB-3.0lp
    Choose Options

    MGB-3.0lp

    The MGB-3.0lp magnetic base is designed to be used as a stable mounting platform for isolation tables lacking mounting holes, or on any magnetic surface. The magnetic field of the MGB-3.0lp is activated through a 60° rotation of a manual lever that...
    K946,780.63
    Choose Options
  • TC-4 TC-4
    Choose Options

    TC-4

    Our TC series table clamps offer a secure method of mounting base plates to isolation tables for off-axis mounting applications. These simple but sturdy clamps can be used in a wide range of applications, such as cable management or base plate mounting...
    K64,309.63
    Choose Options
  • MGB/HC MGB/HC
    Choose Options

    MGB/HC

    These small (1.0-inch diameter) magnetic bases are designed to be used with our MS series magnetic strips. The bases come in four tapped versions. The MGB/8 can be combined with our MPR post to create mounting solutions for many different applications...
    K135,764.77
    Choose Options
  • MGB/20 MGB/20
    Choose Options

    MGB/20

    These small (1.0-inch diameter) magnetic bases are designed to be used with our MS series magnetic strips. The bases come in four tapped versions. The MGB/8 can be combined with our MPR post to create mounting solutions for many different applications...
    K135,764.77
    Choose Options