Construction Hardware

These are the building blocks of your lab. Do you need a platform mounted to your isolation table? How about a tower to mount a camera in precisely the right spot? Magnetic feet for easy removal? Check out our selection of versatile construction hardware.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (52)
Magnetic Bases (6)
Mounting Clamps (7)
Platforms (3)
Thread Adapters (7)
Universal Brackets (14)
  • PY Series Mount PY Series Mount
    Choose Options

    PY Series Mount

    The PY-2 pitch / yaw mount is designed to be used in conjunction with the Model 3010 fiber holder and 1600 or 7600 series translation stages. The axially loaded pivot mechanism provides a stable platform that gives 7° of pitch and yaw motion. The...
    $230.00 - $1,000.00
    Choose Options
  • MXTa Series Platform MXTa Series Platform
    Choose Options

    MXTa Series Platform

    These adjustable angle platforms are easy to use and come in three convenient sizes. They are attached to the table top or bread board with a single 1/4-20 cap screw through a recessed slot for maximum position­ing flexibility. Angular locking is done...
    $80.00 - $100.00
    Choose Options
  • MX_12P Tower MX_12P Tower
    Choose Options

    MX_12P Tower

    The MX_12P is a Series of versatile platform for mounting a variety of hardware at any level on an isolation table or platform. A complete set of AS series spacers allows flexible vertical adjustment from 2.5- to 12.0 inches in 0.5 inch increments...
    $365.00 - $530.00
    Choose Options
  • MS Series Magnetic Strip MS Series Magnetic Strip
    Choose Options

    MS Series Magnetic Strip

    The MS series magnetic strips allow the user to create a magnetic interface on nonmagnetic surfaces. These magnetic strips are made from magnetic stainless steel and are a cost-effective alternative to solid steel platforms. The mounting holes accept...
    $40.00
    Choose Options
  • BB Series Building Block BB Series Building Block
    Choose Options

    BB Series Building Block

    BB series building blocks are simple construction components and are a cost-effective alternative to having expensive machine shops build one-off adapter/interface plates. The BB-1.0 cube is designed to change the mounting surface by 90°. It has one...
    $24.00 - $26.00
    Choose Options
  • Rectangular Aluminum Platform Rectangular Aluminum Platform
    Choose Options

    Rectangular Aluminum Platform

    Our aluminum platforms are designed for maximum flexibility and machinability. With nine sizes to choose from, these solid aluminum platforms are an affordable option for added mounting surface. These platforms may be used as stand-alone platforms...
    $105.00 - $1,350.00
    Choose Options
  • ABP-R Series Adapter ABP-R Series Adapter
    Choose Options

    ABP-R Series Adapter

    ABP-R series of adapter plugs enable the user to benefit from the location flexibility of the ABP-R mounting base. These adapter plugs come in versions compatible with 1/4-20(M6) or 8-32(M4) attachments.Product FeaturesRotation base adapterVacuum...
    $17.00
    Choose Options
  • T-1 Series Table T-1 Series Table
    Choose Options

    T-1 Series Table

    The T-1 prism table is designed to mount prisms and beamsplitter cubes to our IM100.T2 mirror mounts. This versatile design incorporates T1-C clamps with a self-aligning V-groove and O-ring pads to ensure secure damage-free holding. The T-1 prism table...
    $60.00
    Choose Options
  • AS-C Series Clamp AS-C Series Clamp
    Choose Options

    AS-C Series Clamp

    The AS-C post clamp is designed to mount to our AS series and LMP series posts. The symmetrical design has a 1/4-20(M6) clearance, 8-32(M4) and 1/4-20(M6) tapped holes conveniently located to attach a wide variety of devices. The clamp design will...
    $80.00
    Choose Options
  • SW-2 Series Assortment SW-2 Series Assortment
    Choose Options

    SW-2 Series Assortment

    The SW-2 assortment is the SW-1 box but without the drivers.The screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series...
    $155.00
    Choose Options
  • PH-1 Series Hardware Assortment PH-1 Series Hardware Assortment
    Choose Options

    PH-1 Series Hardware Assortment

    Our PH-1 platform hardware has the necessary stainless steel cap screws, washers and set screws needed to assemble our PSR platform support rods and AS series spacers to our 4080, 8090, 1200, and 12000 series platforms.Product FeaturesStainless steel...
    $28.00
    Choose Options
  • MX-APT-T Series Adapter MX-APT-T Series Adapter
    Choose Options

    MX-APT-T Series Adapter

    The MX-APC-T top plate is part of the MX-AP series adapter plates and is equipped with nine 1/4-20 (M6) tapped holes. This additional top plate adds flexibility to the MX-AP series by allowing quick, simple removal, or replacement of equipment out-of and...
    $100.00
    Choose Options
  • MX-APC-T Series Adapter MX-APC-T Series Adapter
    Choose Options

    MX-APC-T Series Adapter

    The MX-APC top plate is part of the MX-AP series adapter plates and is equipped with nine clearance holes for 1/4-20 (M6) cap screws and four holes tapped 1/4-20 (M6).Product FeaturesFlexible mounting designVacuum compatible versions available upon...
    $100.00
    Choose Options
  • MX-APT Series Base Plate MX-APT Series Base Plate
    Choose Options

    MX-APT Series Base Plate

    The MX-AP series adapter plates are specifically designed to speed up the cumbersome mounting and unmounting of translation stages stacked in an XY configuration. With the MX-AP series, it is no longer necessary to disassemble stacked stages to access...
    $155.00
    Choose Options
  • MX-APC Series Base Plate MX-APC Series Base Plate
    Choose Options

    MX-APC Series Base Plate

    The MX-AP series adapter plates are specifically designed to speed up the cumbersome mounting and unmounting of translation stages stacked in an XY configuration. With the MX-AP series, it is no longer necessary to disassemble stacked stages to access...
    $155.00
    Choose Options
  • SW-1R Series Hardware Assortment SW-1R Series Hardware Assortment
    Choose Options

    SW-1R Series Hardware Assortment

    The SW-1R replacement screw/washer sets are available without the box or Bondhus drivers. The SW-2 assortment includes a box but without the drivers.Choose options to see performance specifications and downloads.
    $210.00
    Choose Options