Construction Hardware

These are the building blocks of your lab. Do you need a platform mounted to your isolation table? How about a tower to mount a camera in precisely the right spot? Magnetic feet for easy removal? Check out our selection of versatile construction hardware.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

All (49)

Magnetic Bases (6)

Mounting Clamps (7)

Thread Adapters (7)

Universal Brackets (11)

Choose Options

PY Series Mount

The PY-2 pitch / yaw mount is designed to be used in conjunction with the Model 3010 fiber holder and 1600 or 7600 series translation stages. The axially loaded pivot mechanism provides a stable platform that gives 7° of pitch and yaw motion. The...

MSRP:

S/853.02 - S/3,708.80

Choose Options
Choose Options

MXTa Series Platform

These adjustable angle platforms are easy to use and come in three convenient sizes. They are attached to the table top or bread board with a single 1/4-20 cap screw through a recessed slot for maximum positioning flexibility. Angular locking is done...

MSRP:

S/296.70 - S/370.88

Choose Options
Choose Options

MX_12P Tower

The MX_12P is a Series of versatile platform for mounting a variety of hardware at any level on an isolation table or platform. A complete set of AS series spacers allows flexible vertical adjustment from 2.5- to 12.0 inches in 0.5 inch increments...

MSRP:

S/1,353.71 - S/1,965.66

Choose Options
Choose Options

MS Series Magnetic Strip

The MS series magnetic strips allow the user to create a magnetic interface on nonmagnetic surfaces. These magnetic strips are made from magnetic stainless steel and are a cost-effective alternative to solid steel platforms. The mounting holes accept...

MSRP:

S/148.35

Choose Options
Choose Options

BB Series Building Block

BB series building blocks are simple construction components and are a cost-effective alternative to having expensive machine shops build one-off adapter/interface plates. The BB-1.0 cube is designed to change the mounting surface by 90°. It has one...

MSRP:

S/89.01 - S/96.43

Choose Options
Choose Options

Rectangular Aluminum Platform

Our aluminum platforms are designed for maximum flexibility and machinability. With nine sizes to choose from, these solid aluminum platforms are an affordable option for added mounting surface. These platforms may be used as stand-alone platforms...

MSRP:

S/389.42 - S/5,006.88

Choose Options
Choose Options

ABP-R Series Adapter

ABP-R series of adapter plugs enable the user to benefit from the location flexibility of the ABP-R mounting base. These adapter plugs come in versions compatible with 1/4-20(M6) or 8-32(M4) attachments.Product FeaturesRotation base adapterVacuum...

MSRP:

S/63.05

Choose Options
Choose Options

T-1 Series Table

The T-1 prism table is designed to mount prisms and beamsplitter cubes to our IM100.T2 mirror mounts. This versatile design incorporates T1-C clamps with a self-aligning V-groove and O-ring pads to ensure secure damage-free holding. The T-1 prism table...

MSRP:

S/222.53

Choose Options
Choose Options

AS-C Series Clamp

The AS-C post clamp is designed to mount to our AS series and LMP series posts. The symmetrical design has a 1/4-20(M6) clearance, 8-32(M4) and 1/4-20(M6) tapped holes conveniently located to attach a wide variety of devices. The clamp design will...

MSRP:

S/296.70

Choose Options
Choose Options

SW-2 Series Assortment

The SW-2 assortment is the SW-1 box but without the drivers.The screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series...

MSRP:

S/574.86

Choose Options
Choose Options

PH-1 Series Hardware Assortment

Our PH-1 platform hardware has the necessary stainless steel cap screws, washers and set screws needed to assemble our PSR platform support rods and AS series spacers to our 4080, 8090, 1200, and 12000 series platforms.Product FeaturesStainless steel...

MSRP:

S/103.85

Choose Options
Choose Options

MX-APC Series Base Plate

The MX-AP series adapter plates are specifically designed to speed up the cumbersome mounting and unmounting of translation stages stacked in an XY configuration. With the MX-AP series, it is no longer necessary to disassemble stacked stages to access...

MSRP:

S/574.86

Choose Options
Choose Options

SW-1R Series Hardware Assortment

The SW-1R replacement screw/washer sets are available without the box or Bondhus drivers. The SW-2 assortment includes a box but without the drivers.Choose options to see performance specifications and downloads.

MSRP:

S/778.85

Choose Options
Choose Options

SW-1 Series Hardware Assortment

The SW-1 screw and washer assortment has all the necessary hardware for building many different setups with our related products. The kit includes stainless steel cap screws for attaching AS series spacers to PSR series platform support rods. Also...

MSRP:

S/982.83

Choose Options
Choose Options

MXT Series Platform

The MXT is a small and stable tilt platform that works well where the angle of attack needs to be adjusted. The angle is adjusted by turning the knob in the back of the stage. The angle of the platform surface can be read on the scale that is mounted on...

MSRP:

S/2,559.07

Choose Options
Choose Options

MX5T Series Platform

The MX5T's adjustable wedge design facilitates fixed angle setups. The 5.0-inch x 5.0-inch platform's top plate is fixed in place by two adjustable linking arms. They are secured by four 1/4-20 hex screws to ensure rock solid stability. The angle is...

MSRP:

S/1,353.71 - S/1,854.40

Choose Options

Items 17 to 32 of 49 total

1
2
3
4

Your cart is empty