Support Rod Systems

Rods, post-holders, clamps, and adapters allow the positioning of equipment anywhere on your isolation table or workstation. Various sizes and options will enable you to easily position light sources, optics, clamps, and other payloads where needed in your experiments.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (17)
Spacer Sets (1)
Rods & Clamps (4)
  • PRC-0.5 PRC-0.5
    Add to Cart The item has been added

    PRC-0.5

    Our PRC series rod collars offer a convenient way to rotate our PR precision rods without losing vertical alignment. A Delrin® locking screw securely locks the PR rods into the precision bore of the collar. The simple design is useful when aligning...
    ¥134.25
    Add to Cart The item has been added
  • RTC Series Clamp RTC Series Clamp
    Choose Options

    RTC Series Clamp

    The RTC-Series is a unique rotation/translation clamp with separate lock screws for each axis. This low profile clamp is designed to hold PR or MPR series rods and locate them anywhere on the mounting surface. A separate mounting screw allows the user to...
    ¥236.92
    Choose Options
  • PSR Series Rod PSR Series Rod
    Choose Options

    PSR Series Rod

    Our PSR series platform support rods are a solid solution for supporting platforms or other mechanical hardware. PSR platform support rods are specifically designed to be used with our platforms. PSR platform support rods are cross drilled to accept a...
    ¥489.63 - ¥671.27
    Choose Options
  • PRH-i Series Rod Holder PRH-i Series Rod Holder
    Choose Options

    PRH-i Series Rod Holder

    Our new line of PRHi rod holders, now fitted with a neodymium magnetic base, with over 2lbs of pulling force. Providing you with secure positioning before locking down with our TC-4 pedestal clamp. Also, with a spring-loaded lock and is double-bored with...
    ¥221.12 - ¥236.92
    Choose Options
  • PR Series Rod PR Series Rod
    Choose Options

    PR Series Rod

    Our PR and MPR series precision rods are designed to be used with our PRH precision rod holders and ARH adjustable rod holders. These support rods are cross drilled, except the PR-1.0, to accept a 3/16 hex wrench. This cross hole enables secure...
    ¥94.77 - ¥173.74
    Choose Options
  • PRH/MRH Series Rod Holder PRH/MRH Series Rod Holder
    Choose Options

    PRH/MRH Series Rod Holder

    Our MRH and PRH series rod holders are fitted with a spring-loaded lock and is double-bored with three-point rod contact for smooth and wobble-free positioning. Accessories such as universal, cross-rod and rod collar clamps; and rotation / translation...
    ¥118.46 - ¥189.54
    Choose Options
  • LMP Series Post LMP Series Post
    Choose Options

    LMP Series Post

    Our LMP series large mounting rods are a solid solution for supporting platforms or other mechanical hardware. The LMP large mounting post can be directly mounted to an isolation table top, PSR series platform support rods, or AS series spacers. LMP...
    ¥434.35 - ¥552.81
    Choose Options
  • CR Series Clamp CR Series Clamp
    Choose Options

    CR Series Clamp

    The CR-0.5 rod clamps mount two PR series precision rods at a 90° angle. Delrin® clamp screws or 3/16 integral hex screws permit fast, secure rod clamping. These precision bored clamps fit our PR series rods so well that with only moderate finger...
    ¥142.15 - ¥236.92
    Choose Options
  • AS Series Spacer AS Series Spacer
    Choose Options

    AS Series Spacer

    AS aluminum spacers are designed for spacing any device that needs to be adjusted in either the vertical or horizontal plane. AS spacers can be used by themselves or with ABP series base plates. They are also useful for added height adjustment on top of...
    ¥142.15 - ¥347.48
    Choose Options
  • AS-1A Series Spacer AS-1A Series Spacer
    Choose Options

    AS-1A Series Spacer

    AS aluminum spacers for spacing of any device that needs to be adjusted in either the vertical or horizontal plane. AS spacers can be used by themselves or with ABP series base plates. They are also useful for added height adjustment on top of our PSR...
    ¥252.71
    Choose Options
  • UC Series Clamp UC Series Clamp
    Choose Options

    UC Series Clamp

    The UC-0.5 rod clamps mount two PR series precision rods at either 90 or at any angle. The Delrin® clamp screw or 3/16 integral hex screw permit fast, secure rod clamping. These precision bored clamps fit our PR series rods so well that with only...
    ¥260.61 - ¥276.41
    Choose Options
  • TC-4 TC-4
    Choose Options

    TC-4

    Our TC series table clamps offer a secure method of mounting base plates to isolation tables for off-axis mounting applications. These simple but sturdy clamps can be used in a wide range of applications, such as cable management or base plate mounting...
    ¥142.15
    Choose Options
  • RTC-AA RTC-AA
    Choose Options

    RTC-AA

    Adapter assortment contains 1 each of the following adapters:RTC-A1 (1/4-20/M6 tapped)RTC-A2 (8-32/M4 tapped)RTC-A3 (1/4-20/M6 clearance)RTC-A4 (8-32/M4 clearance)Choose options to see performance specifications and downloads.
    ¥205.33
    Choose Options
  • RTC-A4 RTC-A4
    Choose Options

    RTC-A4

    Adapters to use with the RTC-0.5 rod clamp.8-32/M4 clearanceChoose options to see performance specifications and downloads.
    ¥173.74
    Choose Options
  • RTC-A3 RTC-A3
    Choose Options

    RTC-A3

    Adapters to use with the RTC-0.5 rod clamp.1/4-20/M6 clearanceChoose options to see performance specifications and downloads.
    ¥173.74
    Choose Options
  • RTC-A2 RTC-A2
    Choose Options

    RTC-A2

    Threaded adapters to use with the RTC-0.5 series rod clamps.8-32/M4 threadedChoose options to see performance specifications and downloads.
    ¥157.95
    Choose Options