Life Science

Siskiyou has a full line of Microscope translators, Micromanipulators, Probes, and Platform systems to assemble a workstation for your life science research. Whether you are doing patch-clamp recordings, electrophysiology, or in-vivo imaging, Siskiyou has stable mounting and motion control systems that will minimize mechanical drift.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (82)
Imaging (0)
Manipulation (0)
Microscope Platform Stages (0)
Perfusion Chamber (8)
Pipettes & Electrodes (2)
Tissue Slicer (4)
  • PC-H PC-H
    Add to Cart The item has been added

    PC-H

    Made from durable non-corrosive Lexan™ the PC-H perfusion chamber is designed to fit into our 8090c fixed stage platform and our round PC-A series adapters that fit our upright and inverted microscope platform systems. A standard 22mm coverslip is...
    $150.00
    Add to Cart The item has been added
  • MXC-U MXC-U
    Add to Cart The item has been added

    MXC-U

    The MXC-U incorporates our MXC probe / pipette clamp with a pivoting joint. This joint allows the experimenter to locate the probe / pipette axis at compound angles. Locking the MXC-U at the appropriate angle is accomplished with a single lock screw...
    $250.00
    Add to Cart The item has been added
  • MXC-D MXC-D
    Add to Cart The item has been added

    MXC-D

    The MXC-D is compatible with the dovetail on the Axon 200 and 700 series headstages and the HEKA EPC-10 headstage. Note: The dovetail mounting feature must be ordered from HEKA. The MXC-2.5 is a miniature version of the MXC rotatable probe clamp...
    $150.00
    Add to Cart The item has been added
  • MXB MXB
    Add to Cart The item has been added

    MXB

    The MXB probe holder clamp incorporates a simple ball joint design that allows 360° of rotation, and 110° of added pivoting freedom. The base of the MXB has a 8-32 tapped hole for attaching MPR series rods that come in 1.0, 1.5, 2.0, and 3.0...
    $275.00
    Add to Cart The item has been added
  • M2.5 M2.5
    Add to Cart The item has been added

    M2.5

    The M2.5 miniature rotatable probe clamp has 360° of rotation for the replacement of probe/pipettes. Pipettes from 3mm to 10mm diameter can be securely held in the V-groove by the secure clamp. The M2.5 can be mounted to devices with a M2.5 cap...
    $115.00
    Add to Cart The item has been added
  • MXC MXC
    Add to Cart The item has been added

    MXC

    The MXC rotatable probe clamp has 180° of rotation with a repeatable position stop for the replacement of probe/pipettes. The repeatable stop returns to its location with micron-scale accuracy and the stop orientation can be changed simply by...
    $125.00
    Add to Cart The item has been added
  • GB-10 GB-10
    Add to Cart The item has been added

    GB-10

    Electrophysiology experiments require that your electrical equipment is not adding to the data that you are trying to collect. This simple and cost effective grounding block will localize and organize the ground circuit in your system. The GB-10 comes...
    $25.00
    Add to Cart The item has been added
  • PSR Series Rod PSR Series Rod
    Choose Options

    PSR Series Rod

    Our PSR series platform support rods are a solid solution for supporting platforms or other mechanical hardware. PSR platform support rods are specifically designed to be used with our platforms. PSR platform support rods are cross drilled to accept a...
    $62.00 - $85.00
    Choose Options
  • MXPZT-300 Series Solution Switcher MXPZT-300 Series Solution Switcher
    Choose Options

    MXPZT-300 Series Solution Switcher

    The MXPZT-300 series solution switcher uses a high-speed piezo flexure guided nanopositioner to move pipette tips in solution switching applications. It switches theta glass solution streams with respect to the recording electrode very close to the...
    $11,500.00
    Choose Options
  • MXP Series Probe Holder
    Choose Options

    MXP Series Probe Holder

    MXP probe / pipette holders use a 5/16" diameter ceramic mounting rod to ensure thoroughly stable and electrically isolated probe / pipette mounting. MXP probe / pipette holders come in a variety of lengths to accommodate the wide range of setups.Product...
    $125.00
    Choose Options
  • MXOPi-SL Platform Series MXOPi-SL Platform Series
    Choose Options

    MXOPi-SL Platform Series

    XY Translating Platforms, with motorized drives, are available for most upright microscopes. They allow you to move the platform instead of the microscope to find a new recording location while you're still recording from your original patch site...
    $11,150.00
    Choose Options
  • MXE Series Mount MXE Series Mount
    Choose Options

    MXE Series Mount

    MXE headstage mounts come in a variety of lengths to accommodate a wide range of setups, and are compatible with Axopatch CV-4 headstages. MXE headstage mounts use a 5/16" diameter ceramic rod that is aligned to the mounting plate such that its axis of...
    $175.00
    Choose Options
  • MXC-45D Series Mount MXC-45D Series Mount
    Choose Options

    MXC-45D Series Mount

    The MXC-45D's unique design allows repeatable electrode replacement with a simple but accurate rotating clamp. The top clamp of the MXC-45D is designed to be compatible with Axon CV200B, CV-7A, and HEKA EPC-10 headstages. Note: The dovetail mounting...
    $235.00
    Choose Options
  • MXC-45 Series Mount
    Choose Options

    MXC-45 Series Mount

    The MXC-45's unique design allows repeatable electrode replacement with a simple but accurate rotating clamp. The top clamp of the MXC-45 is designed to be compatible with headstage mounting rods from 3- to 10-mm in diameter. The rotating portion is...
    $200.00
    Choose Options
  • MX310 Series Manipulator MX310 Series Manipulator
    Choose Options

    MX310 Series Manipulator

    The time-tested MX310 Huxley-style micromanipulator is ideal for introductory level research and training course use. This stable flexure design has proven itself over the years and has been improved with the addition of 100TPI adjustment screws for 0.1...
    $8,250.00
    Choose Options
  • MX1641 Series Manipulator MX1641 Series Manipulator
    Choose Options

    MX1641 Series Manipulator

    The MX1641 series crossed roller micromanipulator is ideal for introductory level research and training course use. The lead screws are spring-loaded against a solid stop to ensure drift-free operation. The MX1641 incorporates 40TPI screw drive...
    $3,500.00
    Choose Options