Laboratory Mechanicals

From setting up a new lab to replacing individual components in your existing system, Siskiyou provides quality mechanical devices and systems to enable fine adjustment and rock-solid mounting for your sensitive experiments and tasks.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
All (139)
Adjustment Screws & Micrometers (11)
Construction Hardware (5)
Clamps & Tweezers (0)
Dovetail Rail Systems (0)
Lab Jacks (3)
Motion Control (0)
Support Rod Systems (0)
  • HL.500-XY Series Stage HL.500-XY Series Stage
    Choose Options

    HL.500-XY Series Stage

    The HL.500-XY stage has crossed roller bearings for the ultimate in stability, linearity and reduced stiction under heavy loads. We use 20% more bearings for improved bidirectional linearity over the entire travel range, with notable performance...
    $780.00
    Choose Options
  • XXX.5cr-T Series Stage XXX.5cr-T Series Stage
    Choose Options

    XXX.5cr-T Series Stage

    The 50.5cr-T brings top adjust capability to the thinnest line of crossed roller translation stages available. With a 100 pitch screw bearing upon a 60° angle block, the effective thread pitch is 170, giving you the most precise adjustment available...
    $365.00 - $425.00
    Choose Options
  • 331 Series Stage 331 Series Stage
    Choose Options

    331 Series Stage

    The 331 precision ball bearing translation stage offers exceptionally smooth linear travel. The time-tested design has been improved with the addition of more bearing area than similar stages. The increased bearing surface reduces non-linear motion when...
    $300.00
    Choose Options
  • DT-300 Series Stage DT-300 Series Stage
    Choose Options

    DT-300 Series Stage

    The DT-300 dovetail translation stage offers rapid 1.0 inch (25 mm) linear positioning for a variety of components. Adjustment of the 20 pitch lead screw can be made from either side of the DT-300. The drive mechanism is spring-loaded to minimize...
    $185.00
    Choose Options
  • 100cr-A Series Stage 100cr-A Series Stage
    Choose Options

    100cr-A Series Stage

    The 100cr-A precision crossed roller bearing translation stage offers exceptionally smooth linear travel. The time-tested design has been improved with the addition of more bearing area than similar stages. The increased bearing surface reduces...
    $550.00
    Choose Options
  • T-1 Series Table T-1 Series Table
    Choose Options

    T-1 Series Table

    The T-1 prism table is designed to mount prisms and beamsplitter cubes to our IM100.T2 mirror mounts. This versatile design incorporates T1-C clamps with a self-aligning V-groove and O-ring pads to ensure secure damage-free holding. The T-1 prism table...
    $60.00
    Choose Options
  • 840 Series Linear Drive 840 Series Linear Drive
    Choose Options

    840 Series Linear Drive

    The 840 series of encoded actuators incorporate a non-rotating tip to ensure accurate submicron positioning. The 840 series actuators' industry standard 0.375-inch nose mount will fit into any device that has a standard manual micrometer. The 9/16 hex...
    $1,285.00 - $1,525.00
    Choose Options
  • RS-i Rotation Stage Adapter RS-i Rotation Stage Adapter
    Choose Options

    RS-i Rotation Stage Adapter

    The RS-1.0i threaded adapter provides a change from a 1 1/16 -20 internal thread to a 1/4-20 (M6) thread. Also used on Model OG-1.0P series, polarizing gimbal mount.Choose options to see performance specifications and downloads.
    $25.00
    Choose Options
  • MX-RS Series Stage MX-RS Series Stage
    Choose Options

    MX-RS Series Stage

    The MX-RS repeating rotation stage is designed to mount onto our ABP-R. The MX-RS uses a magnetic coupling to ensure submicron relocation. By combining the ABP-R with the MX-RS a multitude of devices can be positioned, rotated out of an experiment, and...
    $350.00
    Choose Options
  • RS-100 Series Stage RS-100 Series Stage
    Choose Options

    RS-100 Series Stage

    The RS100's compact design and right angle drive are ideal for close coupled optic stacking. 0.5-inch polarizers, wave plates, and other small optics can be coarsely positioned using the external knurled dial through a full 360°. Final tuning is...
    $195.00
    Choose Options
  • RC MMF.5 Series Carrier RC MMF.5 Series Carrier
    Choose Options

    RC MMF.5 Series Carrier

    RC series rail carriers attach anywhere along MDR mini dovetail rails for quick and secure positioning of components. These one-piece aluminum RC rail carriers present a low profile and allow close spacing between components. Spring-loaded, hard polymer...
    $130.00
    Choose Options
  • AS-1A Series Spacer AS-1A Series Spacer
    Choose Options

    AS-1A Series Spacer

    AS aluminum spacers for spacing of any device that needs to be adjusted in either the vertical or horizontal plane. AS spacers can be used by themselves or with ABP series base plates. They are also useful for added height adjustment on top of our PSR...
    $32.00
    Choose Options
  • DT100-AB Series Bracket DT100-AB Series Bracket
    Choose Options

    DT100-AB Series Bracket

    The DT100-AB angle bracket is used with the DT-100 miniature dovetail stage to create XZ and YZ configurations.Product FeaturesCompact designVacuum compatible versions available upon requestChoose options to see performance specifications and downloads.
    $45.00
    Choose Options
  • 500XMM Series Linear Drive 500XMM Series Linear Drive
    Choose Options

    500XMM Series Linear Drive

    The 500XMM series of open loop actuators are designed specifically for driving mirror mounts that use 3/8" brass bushings to mount their drive screws. Their compact design minimizes interference to other devices in the area. The simple design uses a...
    $520.00
    Choose Options