Crossed Roller

Crossed roller bearing stages offer all the advantages of ball & rail bearings with higher load capacity and stiffness. The increased load and stiffness are a direct result of replacing the point contact of the ball with a line contact of the roller. Crossed roller bearings are externally loaded in the same manner as ball & rail bearings but require more attention to detail during the assembly process. This lengthened assembly process, plus the added manufacturing time of the ground rollers and guideways, is the reason for the higher cost of these precision stages. Crossed roller stages are ideal for applications requiring high load, high stiffness, and precision bidirectional straightness, such as fiber alignment, semiconductor probing, and cellular research. These stages are available in both motorized and manual versions.

If you can't find what you're looking for below, contact us, and we'll be happy to help find a product that will work, or we will design a custom solution that perfectly suits your application.

Sidebar Sidebar Sidebar
  • 100.5cr Series Stage
    Choose Options

    100.5cr Series Stage

    The 100.5cr series represents the thinnest line of crossed roller stages on the market today. Their slim design is ideal for applications in which space or height is critical. All three sizes are available in X-, XY- or XYZ-axis versions. Each axis has...
    $370.00 - $1,085.00
    Choose Options
  • 1700 Series Stage
    Choose Options

    1700 Series Stage

    1700 series crossed roller translation stages are ideal for a wide range of submicron or micron-scale motion applications. Our 1700 series stages use precision 40 or 80TPI lead screw for smooth positioning along their entire travel. These lead screws...
    $610.00 - $1,800.00
    Choose Options
  • 1600 Series Stage
    Choose Options

    1600 Series Stage

    1600 series crossed roller translation stages are ideal for a wide range of micron or submicron-scale motion applications. Our 1600 series stages use precision 40, or 80TPI lead screws for smooth positioning along their entire travel. These lead screws...
    $395.00 - $1,210.00
    Choose Options
  • 150.5cr Series Stage
    Choose Options

    150.5cr Series Stage

    The 150.5cr series represents the thinnest line of crossed roller stages on the market today. Their slim design is ideal for applications in which space or height is critical. All three sizes are available in X-, XY- or XYZ-axis versions. Each axis has...
    $425.00 - $1,325.00
    Choose Options
  • 50.5cr Series Stage
    Choose Options

    50.5cr Series Stage

    The 50.5cr represents the thinnest line of crossed roller stages on the market today. Their slim design is ideal for applications in which space or height is critical. Available in three sizes with X-, XY- or XYZ-axis versions. Each axis has a...
    $350.00 - $1,020.00
    Choose Options
  • Crossed Roller Series Stage Crossed Roller Series Stage
    Choose Options

    Crossed Roller Series Stage

    The precision crossed roller bearing translation stages offer exceptionally smooth linear travel. The time-tested design has been improved with the addition of more bearing area than similar stages. The increased bearing surface reduces non-linear motion...
    $550.00 - $1,250.00
    Choose Options
  • ABP Series Mounting Plate ABP Series Mounting Plate
    Choose Options

    ABP Series Mounting Plate

    These low profile, solid aluminum base plates provides secure mounting for 50.5cr, 100.5cr,150.5cr series and 50.25dt, 100.25dt, 150.25dt stages. The machined slots in this base plate accommodate mounting with 1/4-20 or M6 screws on 1.0 inch or 25mm bolt...
    $27.00 - $40.00
    Choose Options
  • HL.500-XY Series Stage HL.500-XY Series Stage
    Choose Options

    HL.500-XY Series Stage

    The HL.500-XY stage has crossed roller bearings for the ultimate in stability, linearity and reduced stiction under heavy loads. We use 20% more bearings for improved bidirectional linearity over the entire travel range, with notable performance...
    $780.00
    Choose Options
  • XXX.5cr-T Series Stage XXX.5cr-T Series Stage
    Choose Options

    XXX.5cr-T Series Stage

    The 50.5cr-T brings top adjust capability to the thinnest line of crossed roller translation stages available. With a 100 pitch screw bearing upon a 60° angle block, the effective thread pitch is 170, giving you the most precise adjustment available...
    $365.00 - $425.00
    Choose Options
  • 100cr-A Series Stage 100cr-A Series Stage
    Choose Options

    100cr-A Series Stage

    The 100cr-A precision crossed roller bearing translation stage offers exceptionally smooth linear travel. The time-tested design has been improved with the addition of more bearing area than similar stages. The increased bearing surface reduces...
    $550.00
    Choose Options
  • MX-AB2 Series Adapter MX-AB2 Series Adapter
    Choose Options

    MX-AB2 Series Adapter

    Although the MX-AB2 was designed to be used with the 200cr and 200cri stages, the 1.0-inch spaced mounting holes allow the user to create stand-alone Z-axis mounting or add a Z-axis to X / XY from any of our motorized or manual stages.Product...
    $85.00
    Choose Options